Y3N

1. Make sure PIN code is closed, or the Magic dual sim card can’t work properly (for SIM card rejected)
2. When use the dual sim card, please handle the function after mobile finish reading messages and phone book , so that Magic sim card works properly .( For example, when you operate the computer , if you operate other function while unfinished the program, the computer will be halt , the same as the Magic dual sim card. )
3. When switch on line for NOKIA mobiles, it will appear “whether updating SIM card”, please press “cancel”, it will switch automatically. (You can try to dial other mobiles to check whether it’s normal to switch. please try many times for the different characteristic)
4. Switch numbers with NOKIA and MOTO mobiles, the mobile will show “please inset SIM card.” it will be ok after a minute
5. When you can’t find SIM card after inserted into mobile, please add a sponge to make the magic sim card more tightly. Or you can use the ball pen to prick the 12 small bulgy spots, increase the thickness, in order to make contact well.
6. If your sim card is no signal while using Magic dual sim card, (16th) it will cause not to switch number on line, only save this two numbers in phonebook.
For example: Input “001” , then press “ save” key , it will switch to sim1
Input “002” , then press “ save” key , it will switch to sim2
7. Using Magic sim card, if the sim card rejected, maybe it is without good cutting, please check the bulgy spots and adjust the position or clean the sheet copper of the dual sim card.
When the chip is on top of the sim card , you can use a cutter; when the chip is in the middle of the sim card , we suggest you’d better use scissors.
8. When use dual sim card, if mobile ask for “insert sim card”, please change the position of two sim card and make sure a good contact between sim card, dual sim card and mobile.